Mechanical T-Rex

A wooden T-Rex that walks back and forth from a wired controller with red and green buttons. Two cranks set facing opposite ways make the legs take turns.

Coming soon The photo build guide, 3D model, course and teacher pack for this kit are on the way.

At a glance

Build
16 steps
Power
2 AA batteries (not included)
You’ll need
Screwdriver, 2 AA batteries
What it teaches
Cranks and linkages, Why the cranks must face opposite ways, How a geared motor slows and strengthens
Good to know
One wiring step should be done by an adult.

Shop the Mechanical T-Rex

Frequently asked questions

It won't walk
Check the two crank plates (No. 12) on the motor shaft face opposite ways (manual step 11). If they face the same way, the legs can't take turns.
The legs are stiff or stick
Leave a 1 mm gap between plates 13 and 14, and don't overtighten the screws (manual step 12).
What does the Mechanical T-Rex teach?
It teaches cranks and linkages, why the cranks must face opposite ways and how a geared motor slows and strengthens.
How many steps does it take to build the Mechanical T-Rex?
The Mechanical T-Rex has 16 build steps.
What power does the Mechanical T-Rex need?
Power: 2 AA batteries (not included).
What do I need to build the Mechanical T-Rex?
What you’ll need: screwdriver and 2 AA batteries.
Which stage is the Mechanical T-Rex for?
It is a Intermediate Engineers kit (transmission, linkages and wiring), in the Engineering category under Mechs.
Is there a photo build guide for the Mechanical T-Rex?
Not yet. The photo build guide, 3D model, course and teacher pack for this kit are coming soon. For now, follow the paper instruction manual in the box. It has 16 steps.
Is there anything else to know about the Mechanical T-Rex?
One wiring step should be done by an adult.

More Engineering kits